Shure Beta 87C

Smooth, wide frequency response with slight presence rise
Uniform cardioid polar pattern for maximum isolation
Minimum off-axis tone coloration
Low-frequency roll-off compensates for proximity effect
Three-stage pop filter minimizes breath pop and noise
Break-resistant stand adapter
Frequency response: 50 - 20,000 Hz

Transducer Type
Condenser (electret bias)

Frequency Response
50 to 20,000 Hz

Polar Pattern
Cardioid

Output Impedance
Rated at 150 ohms (100 Ohms actual +/- 20%)
Recommended minimum load impedance: 800 ohms

Sensitivity (at 1,000 Hz)
Open Circuit Voltage: -51 dBV/Pa (2 mV)
(1 Pa = 94 dB SPL)

Output Clipping Level
1000 Ohm Load at 1,000 Hz: -6 dBV (0.5 V)

Maximum SPL
139 dB at 1,000 Hz (0.25% THD, 1000 Ohm load)

Self-Noise
22 dB typical, A-weighted
24 dB typical, weighted per DIN 45 405
(equivalent sound pressure level; measured with true rms voltmeter)

Dynamic Range
117 dB (maximum SPL to A-weighted noise level)

Hum Sensitivity
-5 dB equivalent SPL, maximum, in a 1 mOe field (60 Hz)

Signal-to-Noise Ratio
72 dB at 94 dB SPL (IEC 651)*
*S/N ratio is difference between 94 dB SPL and equivalent SPL of self-noise A-weighted.

Polarity
Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of the output connector.

Power
Phantom Supply Requirement: 11 to 52 Vdc, positive at both pins 2 and 3
Current Drain: 1.0 to 1.2 mA

Connector
Three-pin (XLR) professional audio

Case
Aluminum construction with painted blue metallic finish, and hardened steel grille with nickel satin chrome plating

Dimensions
See User Guide

Net Weight
Net: 207 grams (7.6 oz)
Packaged: 565 grams (1.24 lbs)

Environmental Conditions
Operating: -18 degrees to 60 degrees C (0 degrees to 135 degrees F)(relative humidity <90%)
Storage: -29 degrees to 74 degrees C (-20 degrees to 165 degrees F) (relative humidity <80%)